H20 to HH0 Hydrolyser OpenSource/Hardware developped by the BioDeploy .Systems team engineer.
This Hydrolyser will be updated with you comments, it is an offer to mankind. Use it safely and please, don't use this files if you don't have seen how to use the hydrolyser. Don't try to do this if you are not agree with the User Chart.
Enjoy your new tool.
This is an Hydrolyser made in Open Source/Hardware
It is the first release, codes and variables will be cleaned soon.
Peace and Prosperity. Kisses from France.
You can redifine all parameters in using OpenScad or just use .Thing and .Stl extensions.
All is defined by the maximum parameters of your 3d Printer.
Here it's on the Replicator 2x maximum spec.
Have a nice day, be careful, you have all the time you want to explore the files and understand how it's work !
Important, Don't put things on you Hydrolyser ! Why ?!
Because the top will go up if pressure increase in the hydrolysis compartment, this will stop the hydrolysis naturaly, when the electrodes will be in the air and not in the water.
Do attention, use an independent battery, not AC power to supply your hydrolyser in electricity.