Camera Lens Cap Holder - 72mm x 25mm
by TeamTeamUSA, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Need a smart way to keep the cap for a 72mm diameter lens that attaches to a 25mm camera strap (e.g., Op/Tech USA Pro)? This works perfectly!
Also included is an STL that has fillets for strength and wearability.
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=9860
Customized using these options:
buckle_gap = 12
mount_lip_height = 0.1
mount_width = 4
buckle_width = 25
mount_height = 3
mount_lip_width = 0.2
buckle_thickness = 4
mount_base = 3
circle_sides = 120
lens_diameter = 72
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Camera Lens Cap Holder - 72mm x 25mm by TeamTeamUSA is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TeamTeamUSA a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TeamTeamUSA would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).