Contents
Tags
License


Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagSummary
The $2 Curtain Rod System.
Designed to work with ikeas $1 small curtain rods (002.213.94)
Curtain Rod Specs
http://www.ikea.com/us/en/catalog/products/00221394/
4 Rod length choices
2 Colors
Low Cost - High Quality
Hanger Specs
-Easy to install and high strength.
-Low print time
-2 Hours of printing time per window set
-Ultra low replacement cost / upgrade
-Snap and Press Fit assembly
- Uses #8 wood pan head screws for attachment
Cost to 3D Print Hanger Set - $.35
Cost to 3D Print End Caps - $.65
Cost for Ikea Rod - $1
I could not deal with the fact that hanging a piece of tubing over your window has to cost more than $10 a window.
The sizing is dead on with .25MM layer thickness and 5% infill and 1 shell.
If you want to hang a monkey off the hanger I would recommend printing with 2 shells and a .17mm layer thickness and 20% infill.
I don't condone the hanging of monkeys.
Instructions
Tools required :
1 Screw Driver (or screw gun)
4 #8 Wood Screws (self drilling)
Tools that make life better.
A small level
Pencil
Tape Measure
Have fun!