I was able to print both the box and the lid but the bottom layers for both are super thin (0.4mm). The lid was breaking because of this.
This remix just adds width to the lid and the bottom of the tray for a sturdier box.
Thank you for the great design!
- Printed on a Solidoodle 4, with clear and red PLA @ 185 degC, 65 degC bed.
- 60 mm/s
- 0.2mm layer height
- Used 50% infill for strong base and lid (the lid top is still thin, about 1 mm so still needs to be printed with a decent infill value).