Minimalist wallet: card holder with small money clip built in

by pwkalahar Aug 15, 2015
Download All Files

Thing Apps Enabled

Please Login to Comment

What is this?! A WALLET FOR ANTS?!

Curious to know, What the first design looked like.

this print showed my how well my printer handles bridging. i thought that the print was going to fail because i forgot to add support but it ended up just fine.

well someone knows his creditcard number

when i load it in cure it was to small. only 2cm long. can you give me correct stl. please ?
or can you give me a hint what i should do ?

Change the scale. I model in inches. If it can auto enlarge do that, otherwise just take it X 25.4

If slicing in Cura do a uniform scale of 25.4 and it will be right.

There is a small bump about 1" up from the bottom that holds the cards.

The regular version has the bump as part of the 3D print. The rubber bumper version has a hole you fill with rubber 0-ring stock.

What holds the cards in?

luciandepold is definitely right. This was my bad. I am and inches kind of guy and everything I do is that way. So make sure you scale it up if you use my files.

Sorry about the confusion

even here in thingi, the scale is not right. take a look at the preview for the STLs. the card is less then 1 cm width or high in the preview (take a look at the underlying grid)!
i had to scale your design up by thumb ! maybe that is why so few got made ???

something is wrong with the scale ! i think you did not use milimeters. is inch a standard in the US for stl ?

Thanks for the publicity, I can use all the help I can get.

nice! giving you some shoutouts about your kickstarter :)

Comments deleted.

Heads up, posting an image of a credit card is probably a bad idea.

Looks like he's used a pre-paid card for the photo. Probably long since drained.

This is correct, it is a $50 pre paid debit card. All the money on it was spent prior to using for pictures.