Luer-type Pneumatic Bladder Fitting
by gianteye, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
One of the most important elements in creating a pneumatic actuator is a solid air-tight fastener. I've been experimenting with different methods for creating easy-to-install fasteners for the bladders that make up part of the actuators in the Neucuff.
This is my latest version. It requires a 4mm thick, 24mm wide flange on the bladder with an 8mm inlet.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Luer-type Pneumatic Bladder Fitting by gianteye is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving gianteye a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gianteye would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).