DaVinci Inside spool holders
by jlambe15, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is setup for one 60mm and one universal 60-85mm spool. The post to hang the spool is lower than any other designs I found on Thingiverse. The HatchBox spools I user are taller and needed this modification. It also has a tighter fit between wall ribs, so it holds steady. This is currently setup on an XYZ Da Vinci 1.0.
Hope you like it.
Use the filament guides from here: http://www.thingiverse.com/thing:592197
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
DaVinci Inside spool holders by jlambe15 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jlambe15 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jlambe15 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).