Clipboard Case Pannier Hooks
by anoved, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Found a slim plastic clipboard case at Staples that fits a few of the things I often carry around in my bike bags (notebooks, etc). Modeled these hooks to turn the case into a compact clamshell saddlebag.
I've made the Onshape document public as Clipboard Case Pannier Hook.
I printed a pair of the
doxboxclip.stl models to replace the red latch piece. It fits more securely - I was a bit worried about the original clasp popping loose.
Printed with 0.3 mm layers, 4 perimeters, and 20% rectilinear infille. No supports. To print a symmetrical pair, use your slicing software to flip one instance before printing.
"Vitamins": Attached to the case with some 5x12 mm bolts, nuts, and washers I had lying around. A small bungee cord loops under tabs on the bottom of my bike rack and connects to the hooks to keep them under tension so the case doesn't bounce around too much.
Select a service to print this Thing and ship it to you
Clipboard Case Pannier Hooks by anoved is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving anoved a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure anoved would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).