PRINTinZ Printer Plate shim for Flashforge Creator Pro (4.5mm Z shim)
by 3DPrinterNinja, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This shim fits as shown to trigger the Z axis end stop sooner to account for the thickness of the PRINTinZ plate. All plates are slightly different in thickness, but 4.5mm is the average. Use the bed leveling screws as needed to adjust from there. You can get the plate at https://www.printinz.com/printinz-3d-printer-plates/
Thanks to salbemerson and mclarke for the original designs. This is just a modification for the thicker PRINTinZ Plate release in July of 2015.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PRINTinZ Printer Plate shim for Flashforge Creator Pro (4.5mm Z shim) by 3DPrinterNinja is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving 3DPrinterNinja a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 3DPrinterNinja would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).