Loop End PULL Tension
by ceri, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Caution: I printed this myself, and it does need some tweeks !!
The hole for the pulley is a little too snug,
and the spacing for the pulling bolts needs to be widened, by 2 mm (or so)
All that said, it did appear to be very functional.
A pull tension, for my 3D Printer's 'Y' dolly,
using T2.5 Pully, and M5 Nuts & Bolts,
Print & build pully section:
Long M5 bolt, (shanked if possible)
Ball race , 11 OD, 5 ID
Second Ball Race,
cut off remaining threaded bolt,
Push M5 nuts in to holes,
drill two 5 to 6 mm holes, for bolts,
Print away ...
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/12Y8xVIN4fx
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Loop End PULL Tension by ceri is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ceri a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ceri would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).