Lasercut leather mobile sleeve (changeable parameters for different phones)

by Tarwin, published

Lasercut leather mobile sleeve (changeable parameters for different phones) by Tarwin Aug 23, 2015


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

1535Views 381Downloads Found in Mobile Phone


This is my first to laser cut leather. I made a protective mobile case made out of a thin, soft leather in petrol blue.

I designed the pattern in OpenSCAD and made it able to adapt to different phone sizes. A dxf for my phone (Sony Xperia Z3) is available as well.


Detailed instructions:

Get some material that fits your style. I used a soft 1.2mm thick leather.

If you don't have a Xperia Z3 you need to load the scad file in OpenScad and change the parameters 'mobile_thickness', 'mobile_height' and
'mobile_width' to you phone size.
You need to modify the 'added_height_margin' and 'added_width_margin' as well to fit you type of corners. The parameters in the file are for very round corners (Xperia Z3). Add a bit more for sharp corners like iPhone 5.

After cutting you need to sew the parts together. Start at the bottom and go in a simple wave pattern though the holes up and down again. Don't pull to hard or you will get bumps.

More from Mobile Phone

view more

All Apps

Upgrade this Thing with Thingiverse Apps

No results.