by HeavyRotation, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This monster needs no introduction. Godzilla in a terror to reckon with. He can eat you and stomp on your house at the same time. This is the first in this monster series. It was designed from a drawing, turned into a vector and extruded in Openscad.
Also Check out
Print Zilla_Plate1.stl & Zilla_Plate2.stl. Sand joints for good fit.
Here is the BOM for the Puzzle is you would like to mix the colors up.
godzilla_Bottom_frame.stl X 1
godzilla_top_frame.stl X 1
godzilla_cutout_leg2.stl X 2
godzilla_claw.stl X 8
godzilla_head.stl X 1
godzilla_foot.stl X 2
godzilla_claws_Toe2.stl X 4
godzilla_cutout_arm3.stl X 2
Part my need sanding in joints
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Zilla by HeavyRotation is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving HeavyRotation a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure HeavyRotation would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).