180 size micro quadcopter frame
by tgaframe, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is my new micro quadcopter frame prototype. TechyBee. FlexyBee's new little sister.
I wanted to share with you before producing. Perhaps it will remain as prototype, i'm not sure. If you like it, print it and fly it.
Some Technical Specs.
Volume: 65 cm3
Size: 190mm wheelbase (motor to motor)
1806 size motor,4s 1300mah battery, 4" propeller, 200mw vtx, 25x25 fpv camera, Go pro3 camera.
You need complete to this frame,
M3 tap for screw holes and 4 pcs M3x10 screw.
Please print it with high density as much as you can.
Please visit my website for another frames.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
180 size micro quadcopter frame by tgaframe is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tgaframe a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tgaframe would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).