PrintrBot Simple Beta Z-Axis Limit Switch Mount - V2
by cap60552, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
THIS PART IS NOT FOR RECENT RELEASES OF THE PRINTRBOT SIMPLE
This is my Solution for mounting a Z-Axis limit switch under the Y/Z carriage on the Printrbot Simple Beta. The addition of the switch allows for easier homing of the Z-Axis.
The switch is Radio Shack Part number 275-0016, but any switch of this style should work.
See http://www.printrbottalk.com/forum/viewtopic.php?f=106&t=3895 for wiring diagram.
This thing was made with Tinkercad. Edit it online https://tinkercad.com/things/dFq73C3hk3B
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PrintrBot Simple Beta Z-Axis Limit Switch Mount - V2 by cap60552 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cap60552 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cap60552 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).